Posts by: tnguyen

TEC Talks

   |   By  |  0 Comments

Register here to access our range of TEC talks which highlight how our products and services can create business value for our customers where shutting down operations is not an option, as well as providing a little light relief to our partners.

Continue reading...

Introducing GeoTree Solutions, a ClockSpring|NRI Company

   |   By  |  0 Comments

Final FIller

Effective immediately—ClockSpring|NRI concrete solutions (formerly MIS) will be named GeoTree Solutions, or in its shortened form, ‘GeoTree’. GeoTree Solutions offers the highly engineered products and brand names our customers know and trust, from GeoSpray® and Concrete Cloth™, to RenewWrap®, Syntho-Shield™ and Syntho-Shore™.

Continue reading...

Join CSNRI at PPIM 2020

   |   By  |  0 Comments

A+ Wrap Application

Your Best Resource for High-Performance Critical Infrastructure Solutions.
Senior Pipeline Engineer, Aleese Post will present her paper, “Analyzing the use of standard inspection tools on composite repairs” as part of the Repair Session on Friday, February 21 at 11:00 AM.

Continue reading...

WaterWorld Spotlights Sale of First AVT EZ Valve® Kits to UK Water Company

   |   By  |  0 Comments

Water treatment plant

WaterWorld Spotlights Sale of First AVT EZ Valve™ Kits to UK Water Company

August 14th, 2019

WaterWorld

WaterWorld

Advanced Valve Technologies (AVT), and its UK distributor R2M Ltd. have provided AVT EZ Valve™ Kits to South West Water allowing the company to take a major step forward in controlling burst situations and reducing service interruptions to customers. With the strategic decision to acquire these kits from R2M Ltd, South West Water operatives now have the ability to quickly install valves using their own resources.

The award-winning AVT EZ Valve is a unique, patented inline valve that allows installation under pressure, enabling faster restoration than alternative solutions, preserving pipe integrity, and permitting installation to be carried out under full pressure with no need to shut off the water supply. The kits purchased by SWS include an innovative machine that mills a small 120° slot in the top of the pipe, eliminating the need to cut a coupon or remove a section of the pipeline.

“We are pleased to help South West Water improve its internal capabilities for managing potential interruptions to supply using our award-winning inline valve,” says AVT President Harry Gray. “We designed the AVT EZ Valve Kits to put our technology in the hands of companies that need it. As the first water company in the UK to take advantage of this innovation, South West Water is in a position to respond swiftly to emergency situations and better manage its supply interruption outcomes.”

 

View Full Article

AVT Introduces New Valve Sizes for Installation on Smaller Applications

   |   By  |  0 Comments

Advanced Valve Technologies, A ClockSpring|NRI Company (AVT), a manufacturer of advanced industrial valve products with minimally invasive compact fittings, is expanding its portfolio with the introduction of 1.5-inch, 2-inch, and 3-inch inline valves. The new valve series is an extension of the award-winning AVT EZ Valve™, which is ranked among the industry’s most innovative solutions and requires no water shutoff while the valve is being installed.

Continue reading...

ClockSpring|NRI Steps Up!

   |   By  |  0 Comments

CSNRI Walk to Florida

ClockSpring|NRI is going the extra mile! UK employees challenged themselves to improve their fitness by walking 4,258 miles ‘from the UK to the US’ every quarter, earning 10p/mile from the company. 1Q miles netted £800, with £200 pledged to St. Anne’s Hospice, Alzheimer’s Society, Make-A-Wish Foundation, and Disability Challengers.

Continue reading...

Strength for the Future

   |   By  |  0 Comments

FormaShield

ClockSpring|NRI is shaping the future of critical infrastructure through innovative composites, valves, and concrete products as well as field services, designed to minimize downtime and environmental hazards while maximizing safety and cost-effectiveness.

Continue reading...

Better Results Through Training

   |   By  |  0 Comments

Our world-class products perform best when they are installed properly. ClockSpring|NRI experts provide online and classroom instruction along with hands-on training to prepare technicians for certification, and our team is available to oversee installation to ensure maximized durability, reliability, and cost-efficiency.

Continue reading...

Wind Point Partners Acquires and Combines Clock Spring and Neptune Research

   |   By  |  0 Comments

ClockSpring

Wind Point Partners, a leading Chicago-based private equity firm, announced today it has entered into definitive agreements to simultaneously acquire and merge Clock Spring Company, Inc. and Neptune Research, LLC, two leading providers of high-performance repair and rehabilitation products for global critical infrastructure. The combined business will be named ClockSpring|NRI.

Continue reading...

Energy Northern Perspective Features Clock Spring Solution

   |   By  |  0 Comments

Clock Spring Composites

Composite Restores Riser Integrity Offshore

When a corroded riser was found on an oil platform offshore Africa, the owner needed a solution that would minimize production loss. But this was a challenging repair. The damaged riser included a section of pipe that had been welded, creating an uneven surface; so in addition to addressing corrosion, the repair would have to contend with alignment and weld bridges.

Clock Spring had the answer – the Clock Spring composite repair sleeve and reinforcement system.

Clock Spring-trained and certified technicians prepped the line and filled in the corroded areas, then applied Clock Spring repair sleeves to the riser, restoring the line to safety without requiring production to be shut in.

If you want to know more about how this repair was carried out offshore, you can read the technical article online.

For questions about any of our composite solutions, get in touch with our experts. Our team is always happy to help.

Pipeline & Gas Journal Features Clock Spring Solution

   |   By  |  0 Comments

Composites Restore Pipeline Integrity in Gujarat

When unauthorized surface excavation damaged a buried gas line in Gujarat State, India, the line operator, GSPL, called in Clock Spring to help find a solution. Working through Allied Engineers, an authorized local distributor, Clock Spring resolved the damage and restored the line to safe operations.

In all, the team repaired 22 m (72 ft) of the pipeline, with an average daily repair length of 2.5 m (8 ft). Using Clock Spring sleeves allowed the BAKPL line to be returned to full operational integrity.

You can read the full technical article to find out how our team executed this composite repair.

Contact us if you want to know more about a particular technology or have questions for our experts.

Our team is at your service!

VIEW FULL ARTICLE

AVT EZ Valve® Wins Recognition at 17th Annual Chicago Innovation Awards

   |   By  |  0 Comments

(Houston) – Clock Spring Company, Inc. (Clock Spring), the world’s leading manufacturer of highly innovative and engineered products for the repair and rehabilitation of pipe-based critical infrastructure, announces that AVT, a Clock Spring Company, has won an innovation award for its patented EZ Valve™ at the 17th Annual Chicago Innovation Awards.

Award winners were announced at an event held at Chicago’s Harris Theater on Monday, October 29, 2018, with nearly 1,500 business and civic leaders and supporters of innovation in attendance. The Chicago Innovation Awards is the Chicago region’s foremost recognition of the most innovative products and services brought to market each year.

“The AVT EZ Valve™ helps make people’s lives better and businesses more productive because utilities can insert valves and make repairs without shutting down service or incurring the cost of expensive workarounds,” says Clock Spring CEO and President Matt Boucher. “We’re proud that the Chicago Innovation Awards recognizes the transformation we are enabling for maintaining the reliability of critical infrastructure.”

Ranked among the industry’s most innovative solutions, AVT’s award-winning EZ Valve™ features a built-in isolation gate that allows the valve to be installed under pressure on water and gas distribution lines. AVT products are safe and easy to install for emergency line repair and in ongoing maintenance operations, maintaining water and gas pipeline integrity throughout the installation. The company’s in-house engineering team has developed pioneering equipment that includes valve insertion tools, tapping machines, and a mechanical in-line stopper system for repairing and reinforcing vital pipelines.

The AVT EZ Valve™ is part of the Clock Spring family of products, which includes a range of solutions for repairing and maintaining critical infrastructure. Like all Clock Spring products, it is easy to install, cost-effective to deploy, and durable for decades.

About Clock Spring

Clock Spring simplifies asset stewardship and helps drive global economies by providing safe, sustainable solutions for maintenance and emergency repair of critical infrastructure, including oil, gas, product, and water pipelines, natural gas distribution lines, and high-consequence industrial pipe works. Our composite pipe repair and inline insertion valves have been deployed in 75 countries by installers trained and certified by Clock Spring. Clock Spring solutions include the innovative Snap Wrap, Contour, and DiamondWrap® composite products, the award-winning EZ Valve™ for water and gas lines. All Clock Spring products are easy to install, cost-effective to deploy, and durable for decades. www.clockspring.com

Find out How We Are Supporting Critical Infrastructure Integrity

   |   By  |  0 Comments

AVT Installing EZ Valve Kits

American Water Works Association (AWWA) annual Fall Conference

Westin Mission Hills in Rancho Mirage, CA

October 22 - 25, 2018

AVT EZ Valve™ – Sustainable Solution for Reliable Water Service

Advanced Valve Technologies (AVT), a Clock Spring Company, is showcasing its AVT EZ Valve™ at the 2018 American Water Works Association (AWWA) annual Fall Conference at the Westin Mission Hills in Rancho Mirage, Calif.

From October 22 to 25, this technical conference will provide a forum for more than 1,200 water professionals to engage in discussions about important industry issues. As you network and assess the technology on display at this year’s event, I invite you to come by Booth 304 to find out how we are using innovative products to ensure integrity for critical water lines.

The theme of this year’s conference, #Sustainability, aligns with our objective to simplify asset stewardship by providing safe, sustainable solutions for maintenance and emergency repair of water pipelines.

If you don’t have the chance to attend and want to know more about our sustainable solutions, please get in touch and let us know. Our experts are always happy to help.

Creative Solutions Improve Worker Safety

   |   By  |  0 Comments

The oil and gas industry today is safer than it has been at any other time in history, but US statistics indicate workers in upstream oil and gas operations have one of the highest accident rates across industries. A huge amount of legislation and a long list of regulations have been put in place to address the dangers inherent to upstream oil and gas operations, so why is the number of lost time incidents, injuries and fatalities still high?

Clock Spring President and CEO Matt Boucher looks for answers.

New valve technology trialled by Yorkshire Water to help repair leaks and reduce supply interruptions

   |   By  |  0 Comments

Yorkshire Water has trialled a new innovative valve technology designed to reduce supply interruptions to customers when water pipe repair work is carried out.

The new technology, known as EZ Valve, means that water does not have to be re-zoned when carrying out repairs, which will result in less supply interruptions and discolouration issues.

Typically, water main repair involves rezoning several kilometres of water pipes or temporarily shutting off supply before damaged pipework can be isolated, clamped and fixed. However, the new rubber valve technology means that small sections of pipework can now be controlled to close off water flow, which will allow for pinpoint repairs of leaks and bursts without having to interfere with customers’ water supply or disrupt the network.

The trial was carried out in Harrogate with the valve installed by R2M Site Services, working for contract partner Morrision Utility Services.

Adrian Roberts, field technician at Yorkshire Water, said: “Through speaking to customers we recognise the impact interrupting water supplies can cause and so we aim to reduce average supply interruptions customers experience each year to just two minutes by 2025. The trial of this new valve technology which can be inserted under pressure, if successful, could result in proving to be very useful to help meet this target.”

Yorkshire Water aims to reduce its leakage rates by 40 per cent by 2025 to make it an industry leader. To help achieve this, over 30,0000 acoustic loggers are currently being fitted by the firm into its pipe network that will enable data scientists to listen to the flow of water and detect audio signals that highlight discrepancies that indicate a leak or a burst. This new approach by the firm is part of improving visibility and creating a CALM network to combat the issue of pressure surges.

WaterWorld Features Advanced Valve Technologies Acquired by Clock Spring

   |   By  |  0 Comments

HOUSTON, TEXAS, JULY 27, 2018 -- Advanced Valve Technologies, Inc (AVT) is now part of Clock Spring Company, Inc. Clock Spring's vision is to repair and rebuild critical infrastructure with innovative and safe solutions that are easy to install, cost-effective to deploy, and durable for decades. As such, AVT and Clock Spring are extremely complementary as we are both committed to the safe and sustainable repair and maintenance of critical infrastructure.

Kevin Murphy, the current CEO of AVT, will continue to drive AVT's focus on innovation, safety, and quality; myself and the entire AVT team will continue in our existing roles; and the company will continue to manufacture its innovative EZ Valve™ solution in Chicago.

The acquisition of AVT allows Clock Spring to expand its solutions offering to address flow issues in markets including water and gas, especially with the award-winning EZ™ Valve which is designed with a built-in isolation gate to allow the valve to be installed under pressure in challenging conditions. The in-house AVT engineering team will continue to develop pioneering equipment that is safe and easy to install for emergency line repair and maintain pipeline integrity throughout the installation.

View Full Article

Lucintel Features Clock Spring Acquisition of Advanced Valve Technologies Inc.

   |   By  |  0 Comments

The acquisition of Advanced Valve Technologies Inc. (AVT) will allow Clock Spring to provide superior solutions to resolve flow issues in both the oil and gas and water markets. Among the new products in the Clock Spring inventory is the award-winning EZ Valve, designed with a built-in isolation gate that allows the valve to be installed under pressure in challenging conditions.

With the AVT acquisition, Clock Spring is adding essential technology for improving safety and ensuring service for critical infrastructure.

View Full Article

Clock Spring Aquires AVT Featured by Valve World

   |   By  |  0 Comments

Clock Spring Company, Inc. (Clock Spring) has acquired Advanced Valve Technologies, Inc. (AVT), a manufacturer of advanced industrial valve products with minimally invasive compact fittings.

AVT's EZ Valve™ is designed with a built-in isolation gate that allows the valve to be installed under pressure in challenging conditions. AVT products are easy to install for emergency line repair and maintain pipeline integrity throughout the installation. The company's in-house engineering team has developed equipment that includes valve insertion tools, tapping machines, and a mechanical in-line stopper system for repairing and reinforcing vital pipelines.

View Full Article

IndustryVoice: Composites Repair In-Service Topside Piping System

   |   By  |  0 Comments

Maintaining asset integrity on offshore structures is a priority, which is why owners invest in developing regular maintenance programs to identify irregularities as soon as possible. During a scheduled inspection on an offshore production unit working offshore Africa, workers discovered corrosion on a 26-in. (660-mm) topside production piping system. The pipe needed immediate attention, but the owners did not want to shut in production while the repair was being made. They contracted Clock Spring Company Inc. to provide an engineered composite repair solution to be carried out with the critical production line in service.

The complete pipework had suffered severe external corrosion that affected straight pipe lengths, girth welds, pipe support, T’s, tight radius bends and offtakes. Clock Spring engineers determined the extent of the corrosion and performed a complete in-house engineering analysis to develop a bespoke repair solution that was manufactured in the company’s design facility in Houston.

Because of the range of areas affected, the solution included Clock Spring fully cured laminate as well as Clock Spring Contour wet layup repair, which would be used for the complex geometry configurations. Clock Spring engineers presented the client with a detailed design report outlining the complete repair in accordance with both ASME PCC-2 and ISO TS24817 guidelines.

A team of Clock Spring-trained and certified technicians installed standard Clock Spring 8-layer pre-cured coil sleeves to the straight piping sections, pipe supports, girth welds and 12-inch (305-mm) offtake systems. Because of the extent of the corrosion, installers applied high-compressive-strength filler by hand, molding it in place before installing the Clock Spring coils. The limited clearance between the pipework and deck grating required installers to use a spool feeder to place the repair sleeves.

With repairs made to the straight pipe runs, the team turned its attention to the complex geometry sections that interfaced with the reinforced sections. Clock Spring engineers designed the Contour system specifically for this repair, supplying materials to the work site in component form and mixing them by hand to form the composite repair around the structure on site.

With the repair complete, the topsides was restored to a safe condition for extended service. The Clock Spring design team not only provided safe, quickly executed and effective specialized repairs, but offered complete engineering support following installation.

PIPE DETAILS

  • 26-inch (660-mm) topside production piping system; and
  • Severe external corrosion .

 

PROJECT HIGHLIGHTS

  • Clock Spring and Contour repairs were carried out to restore extensively corroded 26-inch (660-mm) topside production piping system on an offshore asset;
  • The complete pipework was subject to severe external corrosion that affected straight pipe lengths, girth welds, pipe support, T’s, tight radius bends and offtakes;
  • Clock Spring engineers designed a specialized composite repair solution that addressed straight pipe as well as complex pipe geometries; and
  • Production continued while repairs were carried out.

 

Clock Spring training prepares installers to execute repairs using supplied field kits that contain all the materials necessary to perform cost-effective, long-lasting repairs.  Request a meeting with us today.

VIEW FULL ARTICLE

Advanced Valve Technologies acquired by Clock Spring

   |   By  |  0 Comments

Partnership is committed to the safe and sustainable repair and maintenance of critical infrastructure.

July 16 2018

HOUSTON, TEXAS, JULY 27, 2018 -- Advanced Valve Technologies, Inc (AVT) is now part of Clock Spring Company, Inc. Clock Spring's vision is to repair and rebuild critical infrastructure with innovative and safe solutions that are easy to install, cost-effective to deploy, and durable for decades. As such, AVT and Clock Spring are extremely complementary as we are both committed to the safe and sustainable repair and maintenance of critical infrastructure.

Kevin Murphy, the current CEO of AVT, will continue to drive AVT's focus on innovation, safety, and quality; myself and the entire AVT team will continue in our existing roles; and the company will continue to manufacture its innovative EZ Valve™ solution in Chicago.

The acquisition of AVT allows Clock Spring to expand its solutions offering to address flow issues in markets including water and gas, especially with the award-winning EZ™ Valve which is designed with a built-in isolation gate to allow the valve to be installed under pressure in challenging conditions. The in-house AVT engineering team will continue to develop pioneering equipment that is safe and easy to install for emergency line repair and maintain pipeline integrity throughout the installation.

Composite Solutions Simplify Offshore Repairs

   |   By  |  0 Comments

Did you know Clock Spring composite solutions are a fast and safe alternative to traditional repairs for risers or corroded pipe offshore?

Our short video shows how Clock Spring Snap Wrap ES can be installed using rope access in just a few hours instead of several days, reducing risk and causing no disruption to operations.

Designed for 1,000 psi pipe ranging from 0.75 in. to 56 in. diameter, the flexible architecture of this composite solution can be customized for varying levels of protection and structural reinforcement.

Clock Spring training prepares installers to execute repairs using supplied field kits that contain all the materials necessary to perform cost-effective, long-lasting repairs.  Request a meeting with us today.

We look forward showing you how Clock Spring composite solution can address your offshore asset integrity management needs.

Clock Spring’s Global Team is Using Composite Solutions in New Applications

   |   By  |  0 Comments

Clock Spring Company, Inc. Vice President, Product Management and Technical Services, Buddy Powers, and Tim Mally, Global Manager, Plants/Refineries, explain to IDT Expo participants at the annual conference in Houston how Clock Spring is working directly with clients to develop innovative composite solutions for the pipeline and oil and gas industries.

Watch an Excerpt from our IDT Expo Presentation

If you would like to learn more about Clock Spring composite technology and how you can put it to work to manage your assets, you can request a call from one of our experts.

Our team is always happy to help.

ClockSpring|NRI Expands with Acquisition of AVT

   |   By  |  0 Comments

The AVT EZ Valve, an insertion valve, can be used within a range of applications across many industries such as oil refineries and water utility networks.

New valve technologies add advanced products for critical infrastructure

HOUSTON, July 10, 2018 /PRNewswire/ -- Clock Spring Company, Inc. (ClockSpring|NRI), the world's leading manufacturer of products for pipeline and pipe work repair and overhaul solutions, today announced the acquisition of Advanced Valve Technologies, Inc. (AVT), a manufacturer of advanced industrial valve products with minimally invasive compact fittings.

"ClockSpring|NRI's vision is to repair and rebuild critical infrastructure with innovative and safe solutions that are easy to install and cost-effective to deploy," says ClockSpring|NRI CEO and President Matthew Boucher. "Acquiring a company like AVT that aligns with our safety values and high standards for product innovation and quality will allow ClockSpring|NRI to provide superior products to address flow issues in markets including water and gas."

Ranked among the industry's most innovative solutions, AVT's award-winning EZ™ Valve is designed with a built-in isolation gate that allows the valve to be installed under pressure in challenging conditions. AVT products are safe and easy to install for emergency line repair and maintain pipeline integrity throughout the installation. The company's in-house engineering team has developed pioneering equipment that includes valve insertion tools, tapping machines, and a mechanical in-line stopper system for repairing and reinforcing vital pipelines.

"Innovation is an AVT cornerstone, and the reception for our products has been exceptional," says AVT President Kevin Murphy. "Our combination with ClockSpring|NRI broadens our global reach and ensures that AVT will have a more profound impact on ensuring critical infrastructure is managed and maintained safely and sustainability."

"AVT shares ClockSpring|NRI core values in developing engineered solutions for complex integrity issues. With the AVT acquisition, ClockSpring|NRI is adding essential technology for improving safety and ensuring service for critical infrastructure," Boucher says.

About ClockSpring|NRI

ClockSpring|NRI helps drive global economies by ensuring critical infrastructure is managed safely and sustainably. The company's composite pipeline repair products have been deployed in 75 countries. All our products are easy to install, cost effective to deploy, and durable for decades. ClockSpring|NRI solutions also include Snap Wrap, Pipe Support, Contour, Contour WA, Crack Arrestor, Casing Spacer, Black Diamond, and DiamondWrap as well as training services. 

Clock Spring Acquires Advanced Valve Technologies Inc.

   |   By  |  0 Comments

July 16 2018

The acquisition of Advanced Valve Technologies Inc. (AVT) will allow Clock Spring to provide superior solutions to resolve flow issues in both the oil and gas and water markets. Among the new products in the Clock Spring inventory is the award-winning EZ Valve, designed with a built-in isolation gate that allows the valve to be installed under pressure in challenging conditions.

With the AVT acquisition, Clock Spring is adding essential technology for improving safety and ensuring service for critical infrastructure.

Clock Spring acquires AVT

   |   By  |  0 Comments

July 26 2018

Clock Spring Company, Inc. (Clock Spring) has acquired Advanced Valve Technologies, Inc. (AVT), a manufacturer of advanced industrial valve products with minimally invasive compact fittings. 

AVT's EZ™ Valve is designed with a built-in isolation gate that allows the valve to be installed under pressure in challenging conditions. AVT products are easy to install for emergency line repair and maintain pipeline integrity throughout the installation. The company's in-house engineering team has developed equipment that includes valve insertion tools, tapping machines, and a mechanical in-line stopper system for repairing and reinforcing vital pipelines.

Industry Needs A New Approach To Safety

   |   By  |  0 Comments

Matthew Boucher, President and CEO

Clock Spring Company, Inc.

VIEW FULL ARTICLE

E&P

There is an enormous amount of legislation and a long list of regulations that govern safety requirements for offshore oil and gas operations.

Much of what exists today was born out of offshore accidents that resulted in fatalities—the capsizing of the Ocean Ranger offshore Newfoundland that took the lives of all 84 people onboard and the series of explosions that destroyed the Piper Alpha platform in the North Sea offshore Aberdeen, resulting in 167 deaths.

These were very sobering events to which industry responded accordingly. Each fatal accident led to more guidance being developed to address the dangers of offshore oil and gas operations.

Over the years, countless manhours and millions upon millions of dollars have been invested to develop programs that focus on behaviors and processes to improve safety. But despite the time and effort that has been invested to improve worker safety, the oil and gas industry is still a dangerous one.

Statistics published by the U.S. Bureau of Labor Statistics in 2017 show that of the fatal injuries for the mining, quarrying, and oil and gas extraction industry in 2016, 71% were in the oil and gas sector. While statistics indicate the industry is improving, the number of deaths is still high.

Clearly, more work needs to be done.

It is time to step back and get a different perspective—to re-think the industry’s approach to safety and reimagine how safety could be addressed to reduce lost-time incidents and eliminate fatalities.

Automation is one way of removing people from risky activities. Another is having workers interact with dangerous environments remotely, which has led to a renewed focus on developing unmanned facilities. Advancing technologies also have the potential to reduce accidents. An example is a recent announcement by the Oil & Gas Technology Centre in the UK, Total E&P, and taurob in partnership with Technische Universitaet Darmstadt, which are working collectively over the next 18 months to introduce to the North Sea the first robot to work offshore.

These improvements have required heavy investment, but others are not cost intensive and could be adopted easily. One of these is the use of composites to carry out offshore repairs, an approach that eliminates the hot work and heavy lifting traditionally used and replaces them with an option that removes risky activity from riser and process piping repairs offshore.

These are the kinds of safety milestones the industry needs.

The focus has to shift from legislating safety to eliminating variables that can lead to accidents and injuries, adopting ways of working that take dangerous tasks out of the equation.

It is said that the definition of “insanity” is repeating the same mistakes and expecting different results. As an industry, we can do better than that.

Ingenuity, innovation and creative thinking will lead to better ways of working and the development and adoption of materials that allow variables that lead to accidents and injuries to be eliminated.

Clock Spring Composites Enable Safe, Durable Offshore Repairs

   |   By  |  0 Comments

Clock Spring's Buddy Powers featured in OTC 2018 article.

Follow the article link below to read more.

FULL ARTICLE

Composite technologies are changing the way corrosion repairs are being executed offshore. Their efficacy has been proven over several decades onshore in pipeline and refinery repairs, and now, they are becoming more common offshore on risers and riser connectors, caissons and large components that have sustained damage in the extremely corrosive seawater/air environment.

Clock Spring hungry for more buys after first acquisition, CEO says

   |   By  |  0 Comments

Clock Spring Coil

By Marlene Givant Star
February 13, 2018

Clock Spring, a closely-held Houston-based manufacturer of permanent and temporary composite pipeline and pipe work repair solutions, is actively seeking more acquisitions after making its first buy this month, said Matt Boucher, President and CEO.

In early February, the company acquired Citadel Technologies, a Tulsa, Oklahoma-based manufacturer of engineered, carbon-fiber composites. Terms were not disclosed.

Already, the company is under a letter of intent with another target with USD 10m to USD 12m in revenues, he said. It is working on due diligence and an asset purchase agreement. He hopes to complete a deal by April. Carriage Hill is helping the firm identify targets though the Citadel transaction came through Boucher’s own contacts. He previously served as an executive at Lindsay Goldberg-owned companies in the energy industry, most recently Brock Group, he said. The Brock Group was acquired by American Industrial Partners in October 2017.

Boucher was named CEO in June 2016. The company, now nearly 27 years old, enjoyed a long history of success providing alternative repair methods for the pipeline transmission segment. It provided composite repair sleeves as an alternative to welding steel to pipes. The research that developed the method was funded by the pipeline industry, he noted.

However, the business’s revenues and profits peaked in 2011 and had been shrinking in the subsequent years, he said. Boucher was brought in to restore Clock Spring’s market share. He said his mandate was simple: “return the company to growth and accelerate that growth through acquisitions.”

Boucher made some changes to the company’s marketing, public relations and sales processes as well as its compensation plan. “We did start growing again. We’re 70% bigger than when I started with the base business,” he said. In 2017, the company enjoyed 40% top-line growth and saw its profit more than quintuple, he said. He declined to provide exact figures but said revenue is north of USD 20m. Clock Spring has 65 employees, including those of Citadel.

He is interested in target ideas about manufacturers of highly engineered products, both equipment and tools, for the repair and rehabilitation of regulated critical infrastructure such as pipelines, water systems, natural gas and electric utilities as well as some upstream and downstream assets.

Most infrastructure was built 10 to 20 years after World War II and the assets are getting past their useful lives. “Assets in the ground will age and need more repair,” he said.

Targets can be in the US, and also from Western Europe and parts of Asia, such as Japan and Korea, where there are good protections for intellectual property, he said.

Clock Spring is two-thirds owned by an undisclosed family office. Management owns approximately 10%, with a few individual investors owning the remainder.

After integrating Citadel and the next acquisition, Boucher said: “I could see spending USD 50m to USD 100m on a third acquisition.” This would require equity from the family office as well as debt.

The Citadel deal was financed with cash and a small seller note, he said. He is already talking to a handful of banks to provide debt for the next acquisition, he said.

Duane Morris is the company’s law firm. BDO is its accountant.

When asked if the company could eventually look for an exit, he said it’s possible, but the family office has been in it for the long haul – more than 20 years.

Competitors include NRI, which is almost as large as Clock Spring, he said. NRI announced a merger on 2 February, the same day as the Citadel transaction, merging with IMG Composites. Other competitors are parts of very large companies, such as TD Williamson, a large family owned Tulsa, Oklahoma-based company, and Armor Plate, a family-owned Pasadena, Texas-based company.

Citadel provides carbon fiber systems, a critical ingredient that Clock Spring was missing, he said. As a result of the acquisition, Clock Spring has the most complete product set in the industry, Boucher said. “We’re done buying composite repair companies,” he said.

Clock Spring now offers the full gamut of services including water activated systems; wet layup fiberglass systems; pre-cured laminate and carbon fiber systems. On an organic basis, the company is interested in providing hybrid systems that combine glass and carbon or metallics and nonmetallics.

Offshore Magazine: Offshore repairs prove viability of composites

   |   By  |  0 Comments

Composite technologies are changing the way corrosion repairs are carried out on offshore assets. Though there has been slow adoption of this technology in the oil and gas industry, it is a proven alternative that merits further examination. Composites have been used to repair a range of offshore defects, producing positive results that prove they can compete directly with traditional repair techniques to extend the service life of this critical infrastructure.

CONTENDING WITH CORROSION
Offshore assets are exposed to an extremely corrosive environment. The seawater/air creates an environment that is even more corrosive than conditions beneath the surface. Although, marine coatings provide excellent corrosion protection, when exposed to this environment over time they can fail. Corrosion can lead to damage, structural failure, lost production, and in extreme conditions, environmental incidents. To date, the common repair option has been limited to removing damaged sections of pipe and replacing with new spool pieces, which introduces a range of safety risks associated with heavy lifting and welding. These activities also require a weather window for safe execution, and production must be shut in while the repair is being carried out, which can escalate costs.

Composites were developed specifically to contend with corrosion. In general terms, a composite combines two or more materials, a high-strength reinforcement in fibrous form, incorporated into and bonded by a matrix, usually a thermosetting polymer. The most common strength component is glass.

Most glass fibers consist of E-glass, a term that derived from the words “electrical grade glass.” This super-cooled mixture of metallic oxides is brittle and transparent but has very high tensile strength, 500 ksi (3,400 MPa). Glass is produced in a furnace at about 2,192°F (1,200oC) and spun into fibers of approximately 10 microns in diameter by allowing it to drain under its own weight through many heated bushings.

When engineers are designing a composite, they focus on three characteristics:
• Fiber type: glass, carbon, or aramid (strong, heat-resistant synthetic fibers frequently used in aerospace and military applications)
• Fiber form (typically roving, tow, mat, or woven fabric)
• Fiber orientation or architecture (Reinforcement can be oriented in any direction the designer desires. The most common structural elements are designed with greater strength in the direction subjected to the greatest load.

CONSIDERING THE OPTIONS

It is important to distinguish among the composite repair offerings on the market because not all composites are equal. The distinctions can be critical specific to the particular repair applications, so it is important to understand how composite repairs differ.

Any composite repair being considered for an offshore application should be:

• Non-intrusive, limited disruption to normal production
• Suitable for in-service applications
• Permanent, restores the serviceability to the pipe beyond its design life
• Cost effective
• Fully predictable and verifiable by modeling and/or definitive equations found in current design standards
• Able to eliminate all installation variables
• Eective in all locations and environments
• Eective for all pipe grades and sizes
• Designed to meet or exceed current code requirements.
• Formulated and constructed to eliminate field design and field engineering
• Able to conservatively restore the pipe to its original strength
• Rigorously tested and subjected to peer review
• Field proven.

A composite that will work in an offshore environment must be designed carefully to ensure the mechanical properties can provide the necessary strength to restore the line to the appropriate level of operation, typically to its original design standard. With the proper repair designed, installation procedures must provide the permanency required of the repair. This means the composite repair, when completed, must be able to compete with traditional repair alternatives in terms of safety, economics, control of installation variables and effectiveness.

To be reliable and predictable, a composite should be manufactured under controlled conditions. Manufacturing material in a facility allows accurate control of the ratio of glass to resin under conditions that can be monitored. Within a facility, the unidirectional glass strands can be carefully positioned, pre-tensioned and aligned to maximize strength, and the composite can be compressed, dried, heat-treated, cured, and inspected before being shipped as a completed unit to the repair location. This approach allows design variables to be controlled by the manufacturer, producing repair units that are consistent and documented. Regardless of the manufacturing process and its location, a quality composite requires that the reinforcement be completely saturated with the resin. The composite also must be compacted to squeeze out air bubbles and excess resin and be fully cured before it is suitable for carrying loads. In a factory environment, quality control procedures can deliver these properties more consistently in the finished product than can be achieved in field applications. Without this predictable performance, long-term durability would be questionable.

The composite laminate layers produced by Clock Spring are nominally 0.065-in. (1.65 mm) thick and have a glass fiber content ranging from 60% to 70% by weight (45% to 55% by volume). The resulting material exhibits linear elastic behavior up to the point of failure in tension, typically 1.5% to 2% strain. Elastic modulus values are 5 by 106 psi (0.34 by 7.3 bar) in the fiber direction and 1.4 by 106 psi (0.09 by 7.3 bar) in the transverse direction, with tensile strength in the range of 75-100 ksi (517-690 MPa).

It is important to understand the structure and application of a composite material to gauge its suitability for a particular repair. Composites can fail in three areas: the fibers, shear/laminate bonds, and interface failures between the resin and the fiber. In addition, the composite repair is also susceptible to degradation overtime due to moisture absorption, temperature fluctuations, and fatigue. Uniaxial fibers oriented and protected by “size” that is specially designed and heated to promote bonding of the fiber, size, and resin prevent degradation, delivering a much stronger and longer-lasting composite. These fabrication risks are best managed in a controlled manufacturing environment. Wet wraps applied in the field contend with many variables that can be eliminated in a properly managed facility.

COMPOSITE REPAIR

Composite repairs reinforce the damaged section of the substrate by wrapping the defect area with a composite sleeve that shares the hoop load, reducing the stresses in the pipe wall. The hoop load must be efficiently transferred to the composite for the appropriate load sharing to be achieved. The only way to accomplish this is to fill external defects with a high-compressive strength material that protects the thinned ligament from further yield.

This can be designed into the repair system by using unidirectional rovings or woven cloth as the reinforcing element. Unidirectional rovings provide more strength than woven cloth for the same ratio of glass to resin and are less prone to damage caused by cyclical loading. Unidirectional E-glass embedded in a polyester resin provides the best method for high- pressure reinforcement. This part of the repair is crucial because it re-establishes the strength of the pipe, delivering performance that exceeds the “as new” condition. Repair techniques that do not use filler are unsuitable for critical high-pressure repairs. While relatively new to the offshore arena, fiberglass composite repair sleeves have a long track record in other industries.

Building a better composite

Creating a composite that can withstand harsh environments and high pressures requires engineering that factors site conditions into the formula of the composite. The Clock Spring repair sleeve is a fiberglass composite that has a memory, created by a manufacturing method that constrains its cylindrical shape over several concentric layers, similar to the winding spring of a clock or watch. The glass fibers in the composite wrap are continuous and are aligned circumferentially to maximize the composite strength. When the sleeve is installed on a pipeline with the proper adhesive, the resulting structure provides circumferential reinforcement of the defect and reduces the hoop stress of the steel pipe under the wrap.

This three-part system comprises a unique unidirectional composite structure of glass fibers and polymer base, a patented two-part adhesive system, and a proprietary high-compressive strength load transferring compound.

Two application techniques are available for the repair of both low- and high-pressure systems: full-cure and wet wrap. In the full-cure process, the composite sleeve is completely cured in the manufacturing facility and installed using filler and adhesive in the field. The composite sleeve is coiled slightly smaller than the outside diameter of the pipe and cut to the length required by the repair. This method allows the glass direction and composition to be fully controlled. Wet- wrap requires that the glass cloth be wetted with resin in the field and applied to the pipe in the wet condition. The amount or length of the wrap is variable and determined in the field. Curing takes place as part of the installation process.

A typical repair consists of locating and cleaning the damaged area. Filling the defect and other voids under the repair with a high compressive strength filler material to transfer the loads from the pipe to the externally applied composite sleeve. Using adhesive to secure the composite to the pipe, and keeping the repair under tension while it cures to force excess adhesive and filler out the edge of the unit ensures a fully filled, tight fit. Installation takes approximately 30 minutes, and the repair cures in about two hours.

Several factors make the full-cure composite sleeve installation process more desirable than the wet-wrap process. The full-cure application process eliminates the wet-wrap variables of wrap tension, glass alignment, resin saturation, composite length and the installation variables caused by field conditions. The mechanical properties of the full-cure wrap are more consistent and better defined than those of the wet-wrap.

COMPOSITES IN ACTION

Composites have been applied to a range of offshore repairs. In one case, ultrasonic tests revealed several severe internal defects in a 16-in. (406-mm) pipeline running into the main high-pressure separator on a production facility offshore West Africa. The erosion was significant, affecting multiple places along the pipe and growing at such a rate that imminent failure was likely. If the damage were to reach a critical point, the platform would have to be shut in, resulting in a huge loss of production. In addition to the financial impact, there was potential for considerable environmental impact in the event that the eroded pipe developed a leak.

The operator needed a way to reinforce the pipe without halting production. The goal was to find a safe and reliable repair that would allow the line to function safely until the next planned shutdown, nearly a year away.

A Clock Spring Contour repair was designed for the offshore asset in accordance with ISO 24817 2015 guidelines, which provide requirements and recommendations for qualifying, designing, installing, testing, and inspecting the external application of composite repair systems to corroded or damaged pipework, pipelines, tanks, and vessels used in the petroleum, petrochemical, and natural gas industries.

A team of trained technicians cleaned the section of damaged line using power tools to remove the external coating and then bristle blasted it to create a surface profile equivalent to SA2.5 (which requires cleaning to remove all rust, coating, and mill scale to produce a near-white surface) before applying the adhesive, placing the repair unit and putting it under compression, and allowing it to cure to permanency. With the repair completed, the platform continued to operate without incident until the planned shutdown 12 months later, when the damaged section was scheduled to be replaced.

In another instance, an operator offshore Malaysia discovered extensive pitting in a 12-in. (305- mm) riser with back-to-back bends while conducting a riser inspection on an offshore production facility. In some portions of the pipe, pitting had resulted in 60% wall loss. It was imperative to repair the line quickly without disrupting production, so the company chose to address the problem with a composite repair.

A team of specially trained local experts cleaned the riser, grit-blasting it to an SA 2.5 surface prior to applying the composite repair. Once the area was thoroughly cleaned, repair technicians identified the defects and marked them so they could be appropriately treated. The defects, which were concentrated at the bends, were first repaired with 3-in. (76-mm) wide Snap Wrap strips along a 6-ft (1.8-m) length of pipe.

In cases like this, where Snap Wrap applied around pipe bends is placed with spacing that exceeds 0.5 in. (13 mm), the repair is overlaid by a Clock Spring Contour system. In this application, Contour overwrapped the entire 16.4-ft (5-m) length of the repair to create a solid covering. This hybrid system of prefabricated sleeves and in-the-field cured composite repair merges a robust structural laminate with a exible protective outer composite jacket. The repair is designed to last for two decades.

This was a rapidly executed repair, performed in a day and a half of on-site work. A small team carried out the repair with minimal disruption to daily activities and without taking the riser out of service.

Composites compete under water

Composites are suitable for a broad range of applications, but there are some conditions in which they are not an appropriate repair solution. Composites are unsuitable for situations where the surface cannot be properly prepared, which would lead to issues with bonding or sealing, and they cannot be applied on concrete.

They can, however, be used on condensing pipes and in a range of conditions, including under water to depths of 30 ft, which makes them appropriate for installations that heretofore have been carried out by underwater welders.

Traditionally, welding below the water line is either dry, also called hyperbaric welding, or wet. Dry welding requires a structure to be built around the weld area so water can be pumped out to create a dry environment. The area can be small (conned to the damaged area) or large enough for the welder to physically enter. For large areas, oxygen is pumped out of the enclosure, and helium is pumped in. Wet welding, because it is done in the water, introduces the need for a diver properly outfitted with diving equipment, which means it introduces the risks associated with diving. Electric shock is another risk, as is the possibility of explosion if the welding process is not well controlled.

Because hyperbaric welding is better controlled, it produces a more reliable weld than underwater welding. The problem is that environmental conditions are not always conducive to dry welding. And many owners are not comfortable with the risks – both personal and structural – inherent to wet welding.

A repair sleeve can be placed using a special underwater adhesive. The repair, which can be carried out by a trained diver, is relatively straightforward, following the same approach as a repair in dry conditions. Because this approach requires no construction or complex installations to create a dry environment, a composite repair can produce a lasting repair without any hot work. This capability introduces a new alternative for underwater line repair.

On another asset in the Middle East, corrosion was identified on the riser support clamps that secured the production risers to the hull. The 14-in. (610-mm) heavy wall structural cross member was damaged across a length of 26.25 ft (8 m). Severe external corrosion, which in some cases amounted to 80% metal loss on the structural member designed to hold the riser support clamps, was jeopardizing the safety of hydrocarbon production. The company needed a solution that could be carried out offshore in a short time frame with little disruption to its operations.

Performing the repair required the construction of an engineered heavy-wall composite sleeve, manufactured in 24-in. (600 mm) widths using bi-axial glass architecture. The specialized solution produced extended sleeves that would cover a longer length of pipe than a traditional repair.
A trained and certified team of installers applied extensive filler and molding to rebuild the pipe surface to the original outer diameter and installed the sleeves cut to length in a brick wall fashion.

When the repairs were completed, the riser holding clamps were put back into service. This repair averted an incident and allowed the production platform to safely continue operations both during and following the repair.

LOOKING AHEAD

Composite repairs have become more common on offshore oil and gas assets because they are safe, effective, and relatively simple to execute. While they are newly being considered on a larger scale for offshore applications, they have a long track record of successful application in other industries. Today’s composites are the result of a years of engineering efforts and extensive testing that have resulted in a cost-effective and expedient alternative that eliminates heavy lifting and hot work, delivering effective and long-lasting repairs.

The successful execution of a range of composite repairs illustrates the viability of composite solutions for oshore oil and gas assets. The ease, speed, and effectiveness of composite repairs have the potential to dramatically change the way owners and operators contend with corrosion and extend production life on oshore assets.

World Pipelines: A Permanent Solution

   |   By  |  0 Comments

Terminals, plants, transmission pipelines and refineries require a wide range of pipe support configuration to protect pipelines from environmental factors and to meet government regulations on atmospheric corrosion.  Pipelines are subject to movement, elongation, severe weather conditions and other physical wear and tear that all take their toll on pipeline integrity.  Corrosion and defects at pipe support locations complicate maintenance procedures and require costly repairs and inspections, which can interrupt service and production.

Operators seek a solution that provides protection and prolongs the life of damaged pipe.  An example of this is Clock Spring's Pipe Support product, which provides both a preventative and rehabilitative maintenance solution, helping pipeline operators maximise safety, productivity and efficiency.

Learn more >

Continued Service With Composite Repairs

   |   By  |  0 Comments

When engineers set out to define specifications 20 years ago for offshore units that were expected to stay on site for 20 to 25 years, it was not uncommon to take a very conservative approach. That conservatism is reflected in the many assets that are reaching the end of their design lives but still have the basic structural stability to continue operating for years.

While the hulls and superstructures of some offshore productions systems are fit for continued service, some of the components that have been exposed to significant stresses and fatigue over the years are not. For operations to continue safely, it is vital that the necessary repairs and replacements are carried out effectively.

Evaluating assets

Today asset owners have no difficulty getting assistance with the task of evaluating their facilities for continuing service, including an analysis of critical parts and determining which components have experienced sufficient wear to warrant repair or replacement.

This is a critical first step, but the next step is most likely the one that will determine the cost-effectiveness of the life-extension project. If repairs need to be made, how will they be done, and what products will be used?

Considering composites

Composites could be the answer. Composites have been used for offshore repairs for years in a broad range of applications such as structural repairs to risers, caisson leak repairs and for life extension work on large components that have experienced corrosion and sustained environmental damage.

Crevice corrosion, which is a major integrity threat on offshore assets, is a one of the challenges for which a composite solution is ideal. Because of the way it is formulated and applied, Clock Spring composite repairs provide 360 degrees of protection, ensuring that each square inch of the interphase between the pipe and the sleeve is well sealed. The ability to seal the repair mitigates the effects of previous existing corrosion while preventing further damage.

Because there is not a lot of information readily available to explain how composites are being used offshore, it is difficult for decision-makers to feel confident in selecting composite repair technology for their assets.

As with every technology offering, all are not created equal. It is important to know the historical successes of individual composites to understand when a composite repair is a good option.

Putting composites to work

External corrosion is a safety issue for assets that have been deployed for extended periods offshore. Particularly important are high-risk areas on the platform that are difficult to inspect because of limited access, such as riser pipe sections close to the water line and longer pipe networks that are hard to get to. These areas also can be difficult to repair using traditional products. Damage to these components can be addressed with composite technology that not only provides structural reinforcement in weakened areas but protection from future deterioration.

A recent repair concern came to light when an asset owner was performing an inspection on a rig that had previously experienced a leak. Unwilling to risk an environmental incident, the owner began looking for a way to address the problem. The most critical criterion was to find a solution that would not necessitate shutting in production. Because the Clock Spring repair could be carried out without taking the system offline, it was ideal for this offshore production unit.

Normally, a composite solution can be designed around two commonly used design specifications— The American Society of Mechanical Engineers’ PCC-2 article 4.2 and International Organization for Standardization technical specification 24817. This design guidance allows experts to factor the design conditions and life expectancy of the repair into a formula to determine the composite thickness needed.

Before a product could be introduced on the rig, engineers needed to understand the conditions under which the material would have to perform. The composite solution design was based on knowledge of the pipe, upper bound design temperature/pressure limits and loading conditions that would be experienced in this unique offshore application. Once the specifications were established, the composite repair manufacturing process began with qualifying the manufacturing and design process using one of the trusted international standards. To exercise the best process control, Clock Spring provided a method statement and a full design report that presented the basis for the engineering calculations used in the design and outlined the installation procedure.

E&P

See full article featured in E&P.

Sending in reinforcement

   |   By  |  0 Comments

Seeing the need to help the industry preserve critical infrastructure for decades, Clock Spring is on a drive to develop and enhance technologies and improve installation processes for composite pipeline repair.

Buddy Powers, vice president for product management and technical services, says the 25-year-old company known for its eponymous Clock Spring composite repair sleeves has turned its focus to innovating.

“We are taking the products we have now and enhancing them, and developing new products that are synergistic to what we do, which is structurally reinforce critical infrastructure,” Powers says.Clock Spring sleeves can be applied in situations where a pipeline is suffering from corrosion as well as dents and other degradations.

Composite technology has gained wide acceptance as a reliable and safe alternative to pipeline repair. Clock Spring is finding new ways to apply it.

The repair sleeves can be used in nearly all ditch conditions onshore, underwater and even on condensing pipes, Powers says.

The technology is unsuitable for situations where the surface cannot be properly prepared, which would lead to issues with bonding or sealing. It also cannot be used on concrete.

The repair sleeves are typically used to address general corrosion, wall loss, dents, and axial-oriented defects such as cracks and seam flaws.

The sleeves work by constraining weak or damaged pipe. Together, the composite and pipe wall structurally reinforce the pipe to control pressure within the pipe.The company manufactures all the Clock Spring composite materials at its Houston facility. The composite coil has a shape memory.

It is made from glass fibres and wound through a bath of polyester resin, the same material used for underground storage tanks.

During manufacturing, the composite is wound around a mandrel smaller than the diameter of the pipe it is made for and air-cured for 24 hours.

Following the air cure, it is heat treated in an oven at temperatures greater than 180 degrees Fahrenheit to secure the mechanical properties.

Because of its shape memory from its time on the mandrel, it will wind tightly onto the pipeline.

Most composite repair materials, Powers says, are field-cured, a process that requires a weather window and specially trained personnel. Improper installation can result in an incomplete corrosion barrier.

The Clock Spring components can be installed in ambient temperatures from -20 to 120 degrees Fahrenheit (-29 to 49 degrees Celsius) with operational temperatures up to 250 degrees F (121 degrees C). Improving installation ease is a cornerstone of the company’s work, Powers says.

“Clock Spring is trying to basically take the approach that it can develop and enhance current technologies and processes to reinforce critical infrastructure so that it’s easy to install, cost-effective to deploy and durable for decades.”

The company is working to validate its improvements with industry partners.

“We’re also pushing the boundaries of ways we can support higher temperatures and safer installation practices,” Powers says.

This is critical in rope access situations for risers. The goal is to limit the amount of time and number of personnel required on site for repairs. “Less time is safer,” he says.

Clock Spring sleeves were recently used to repair a dented subsea pipeline. While running an inline inspection tool through the pipeline in water depths of 30 feet (nine metres), a client found a “massive amount of dents” caused by a dragged anchor or a barge, Powers says.

Following a critical engineering assessment, divers applied filler, adhesive and Clock Spring sleeves to the dented areas to structurally reinforce the pipeline.

The same acrylic adhesive is used both for air or water applications. “It cures quickly,” Powers says, noting that the adhesive reaches 90% strength under water or on land within two hours, allowing pipeline operators the opportunity to resume throughput on the pipeline more quickly. Standard epoxy adhesives, he says, can take eight to 24 hours to cure.

An incompressible filler is applied to the defective area of the pipeline, so the pipe wall will transfer stresses through the fill material to the composite.

The Clock Spring sleeve is placed around the pipe. Each layer adheres with the acrylic-based glue, and the composite repair is tightened with a torqueing bar.

Clock Spring sleeves are 12 inches long. A sleeve for a 12-inch outside diameter pipe weighs around 20 pounds (nine kilograms), while a sleeve for a 30-inch outside diameter pipe is around 50 pounds.

“These are easily passed around the pipe. They are not heavy at all,” Powers says.

In the case of tight access, the sleeve can be spooled onto the pipe away from the defect area, slid over the damage and tightened. Tight access is one of the main reasons a secondary technology, Snap Wrap, was developed. Made of the same composite, adhesive and filling materials as Clock Spring, Snap Wrap is easier to install in rope access and offshore applications, Powers says.

Installation calls for opening the Snap Wrap shells and snapping them around a pipeline, sequentially, to create the required thickness for the repair. The shells are then tightened and cured.

The company is working to enhance the Snap Wrap offering by making the sleeves longer to cover more linear feet, he says.

While the company came into existence in the early 1990s, research into what became the company’s foundational technology began earlier. In the 1980s, the Gas Research Institute directed a programme to verify the effectiveness, durability and performance characteristics of the repair method.

It was a long road to gain acceptance that a composite could be as – or more – durable than steel.

“A lot of questions needed to be answered,” he says.

The results came out of a decade-long testing programme that verified the viability of the product as an alternative to traditional pipeline repair methods, which required cutting, removing and replacing degraded pipeline, and welding.

“That had tremendous impact on the people working on the pipeline and the operators, from shutting down the line to hot working around hydrocarbons to the heavy equipment around the dig sites and excavations,” Powers says.

“This composite technology offered an alternative. It revolutionised the way pipeline operators approached the repair of pipelines. It changed how people looked at pipeline repair.”

Clock Spring Casing Spacer Axial Shear Testing Results Validate Better Product Performance

   |   By  |  0 Comments

Stress Engineering tests determine greater resistance capacity and enhanced pipeline protection

Houston (July 12, 2017) -  Clock Spring Company, LP (Clock Spring), the world’s leading manufacturer of permanent and temporary composite pipeline and pipe work repair solutions, today announced the results of Stress Engineering Services, Inc.’s (Stress Engineering) full-scale upper-bound shear testing, validating the stronger capacities of the Clock Spring Casing Spacers product. Clock Spring contracted with Stress Engineering to perform the shear tests on its derivative casing spacers product, evaluating and comparing Clock Spring performance against traditional casing centralizer and spacing solutions.

Contractors and operators install casing spacers and centralizers on carrier pipes to protect pipe integrity. They prevent contact between the carrier pipe and casing, minimizing coating damage and during construction and ensuring centralization when construction is complete. The casing acts as a storage vessel to limit the environmental impact in the unlikely event of a leak and can help protect pipelines against third party interference and damage.

The most commonly used casing spacers are bolt-on devices made of plastic or steel. Other common casing spacers are banded wood skids. Unfortunately, while the theory behind these solutions are sound, the bolts and bands often break or move when crews pull or push carrier pipe through casings.  This results in coating damage and also can cause the installed pipe to rest in contact with the casing, which can more quickly lead to corrosion and carrier pipe weakness.

Stress Engineering Services performed shear tests to measure the likelihood of a casing spacer breaking or dislodging during the application of axial force to the pipe and the spacers.  The tests compared the Clock Spring solution to traditional bolted solutions by applying concentric and eccentric shear to spacers installed on abrasion resistant outer coating (ARO) coated steel and PVC pipes. The testing force required to initiate sliding of the Clock Spring solution was approximately 19 times greater than traditional casing spacers and five times harder to keep them moving.  A white paper detailing these dramatic results is available here: Clock Spring Casing Spacer White Paper.

“Axial shear resistance is an important variable and determines the maximum amount of force that can be applied to a spacer before it begins to slide,” said Buddy Powers, Vice President, Product Management and Technical Services. “Needless to say, we couldn’t be happier with the results.”

“We are driving innovation to enhance safety and provide stewardship of customer assets and the environment,” said Matt Boucher, Clock Spring President and Chief Executive Officer.  “These encouraging results about this easy to install product are greatly gratifying and further validation that we’re on the right track.”

Pipeline & Gas Journal: Composite Sleeves Address Mechanical Damage to Pipelines

   |   By  |  0 Comments

Pipeline operators work hard to ensure their pipelines are protected from external corrosion. However, it can be more challenging for operators to keep their pipelines safe from third-party interference. While pipelines are buried, well-marked, and permission is meant to be obtained before digging near a pipeline, in some cases a third party will cause mechanical damage. This can include dents and gouges, which tend to be caused by construction and agriculture, or contact with rocks in the backfill and settlement.

Between 1994 and 2013, one-third of the serious incidents on all types of pipelines were caused by mechanical damage during excavations. This is more than any other single cause1. However, a dramatic reduction of these incidents has trended over the last 20 years due to significant efforts made by the pipeline industry to increase public awareness and engage all stakeholders to the location of underground pipelines.

Depending on the severity and type of dent or mechanical damage, remediation may be considered by the pipeline operator. Composite pipeline repair sleeves are an extremely popular alternative to traditional repair methods such as “cut and replace,” welded sleeves and clamps. They can effectively repair a pipeline with up to 80% external metal loss defects. Composite sleeves have a proven, decades-long track record that has been developed, tested and peer-reviewed as being a suitable system of reinforcement on mechanically damaged liquid and gas pipelines.

Over time, a pipeline will experience some amount of cycling which needs to be addressed as well. The action of pressure cycling on a dent will eventually lead to the initiation of fatigue cracks, and ultimately failure, if not properly addressed. Composite sleeves have been shown to extend the life of a damaged pipe by immobilizing the defect and controlling re-rounding and bulging of the weakened area. It is required to use a filler material underneath the composite to effectively control movement of the dent during pressure cycles.

Composite sleeves are a suitable repair for most types of mechanical damage on pipelines. The four main codes/guidelines utilized to allow the repair of mechanical damage using composite sleeve repairs are:

  • ASME B31.4 (2016)
  • ASME B31.8s (2016)
  • CSA Z-662 (2015)
  • PRCI repair manual (2006)

Testing

In 1987, the Gas Research Institute (GRI, now GTI) assembled a team of pipeline professionals and research organizations to lead a comprehensive program to verify the effectiveness, durability, and performance characteristics of a repair that permanently restores the serviceability of the pipe. GRI engaged Houston-headquartered Stress Engineering to lead the mechanical damage aspects of the program. The testing included dent and gouge repairs.

The 1997 GRI Report No. GRI 97-0143, Evaluation of a Composite System for the repair of mechanical damage in Gas Transmission Lines, involved full-scale tests completed on 12-inch diameter pipe with D/t ratios of 51 and 68 having 15% dents with gouges. Pressure cycles were initially applied between 0 and 50% MAOP for 50,000 cycles, and then between 0 and 100% MAOP until failure. The results showed that the Clock Spring repair system procedure was effective in increasing the fatigue life for the repaired defects by two orders of magnitude when compared to unrepaired sections.

In addition, Clock Spring products were installed over several pipe diameters with increased D/t ratios (96) and gouged depths (30% and 50% of the wall) with repairs applied at 0%, 50%, and 90% MAOP were cycled to prove acceptable fatigue of over 250,000 cycles. Fatigue testing indicates that composite repair sleeves extend fatigue life by an order of magnitude over grinding as the sole repair. The results of this study provided several important insights as to the importance of inspection and the removal of cracks or stress risers from the defect.

Since this landmark study, Clock Spring has had 25 years of dent performance of highly fatigued pipelines globally. The composite sleeve repair system is manufactured in a factory under controlled conditions and then bonded to the pipeline. This type of repair allows greater repeatability, quality and predictability in the pipeline repair installed at the mechanically damaged repair location.

Composite Sleeve Application

Clock Spring composite sleeves are installed by certified technicians in three relatively quick steps. The pipeline does not need to be shut down during the repair process.

Step 1: Pipe preparation – Commercial sand blast to remove coating, removal of stress concentrators in accordance with applicable codes and inspect dent area for surface cracking.

Step 2: Molding the filler into defected area – This incompressible material fills the dent area and acts as a load-transfer agent to transfer the stresses from the pipe to the composite sleeve. If molded, a visual inspection before the installation of the surface can verify good fit-up of the sleeve.

Step 3: Fit the composite sleeve onto the pipe and cinch it down to ensure maximum strength in repair.

Once these steps are complete the composite will cure within one hour and the pipe is ready to be recoated and backfilled.

Case Study

A pipeline dent becomes an immediate concern if the dent is severe or sharp enough to induce cracking. If the dent was caused by third-party damage, such as gouging, this can also initiate cracking. Both of these immediate concerns can also be related to coating disbondment. A coating disbondment issue can lead to corrosion which also affects the integrity of the dent.

An example of addressing this threat using the above procedure for repair features a molding step before the installation of a Clock Spring repair sleeve. An 8% dent with a gouge approximately 10 inches long was dressed to remove stress concentrators and prepared before a single-wrap mold formed the filler material in the dent region, building back the ovality of the pipeline. The molding step ensured constraint of the dent once the repair sleeve was installed.

A dent represents permanent damage to a pipeline by deformation. Dents typically result from a purely radial displacement of the pipe wall during either construction or from external land movement of the pipe across a hard surface, such as a rock. For example, 30-inch diameter gas pipeline with bottom-side dent was repaired using Clock Spring’s ‘Spool Feeder’ method due to limited clearance and confined space.

Conclusion 

One of the many challenges operators face each day is keeping their pipelines safe from the public. It is important that operators are aware of the methods available for repairing mechanically damaged pipe and have a plan in place for when they encounter it. Composite sleeves have been used to constrain the dent.

Composite sleeves are proven to provide almost two orders of magnitude improvement in fatigue life compared to grinding alone and almost three for unrepaired pipe. The strain, as the dent tries to flex, is transferred through the incompressible material into the composite repair.

It is also important that operators fully assess the composite they want to utilize to repair their pipelines, as not all composite repairs are the same. Any company offering a composite repair system for mechanical damage should be able to back up its claims of repair suitability with valid and independent testing.

1 DOT/PHMSA (2014) Pipeline Significant Incident files.  Available at http://primis.phmsa.dot.gov/comm/DamagePrevention.htm.

PDF - Download

Clock Spring Composite Sleeves Address Mechanical Damage to Pipelines

Does your pipeline composite repair look like this after 10 years?

   |   By  |  0 Comments

A major North African based transmission pipeline operator recently excavated a section of 42’’ high pressure gas transmission pipeline. Locating the repair in the middle of the desert was a simple and quick operation due to the marker band performance and GPS within the ILI. 
 
 

After ILI inspection, new corrosion was found on either side of the Clock Spring reinforcement, but the Clock Spring coils were still hard at work protecting the pipe and the environment.  Additional Clock Spring repairs will now be installed extending operational performance decades into the future.

Innovation overcomes installation and ageing problems, Pipelines International

   |   By  |  0 Comments

Clock Spring’s casing spacers serve an important role in preserving pipeline integrity, offering certain advantages over traditional casing spacers.

A critical component of installing a cased carrier pipe is the casing spacer. Casing spacers are installed on the carrier pipe to prevent contact between the carrier pipe and casing, thus protecting the integrity of the cased pipe.

READ MORE