Pipeline & Distribution

The AVT EZ Valve® 1.5″ to 2″ (40mm to 50mm) was specifically desigend to handle the small diameter water pipelines that are found in high-rise buildings, hospitals, factories, HVAC applications and most commercial buildings as well as refining and petrochemical plants. The AVT EZ Valve® 1.5″ to 2″ is an inline insertion valve that can be…

The AVT EZ Valve® 4″ to 14″ (100mm to 350mm) is the most popular range of EZ Valves.Ideal for use in a range of locations and applications such as municipal water networks, transmission and distribution lines, wastewater treatments plants, sewer force mains, high-rise buildings, and refining and petrochemical plants.The AVT EZ Valve 4″ to 14″…

The AVT EZ Valve® 16″ to 24″ (400mm to 600mm) is the most popular range of EZ Valves.It is ideal for use in a range of locations and applications such as municipal water networks, transmission and distribution lines, wastewater treatments plants, sewer force mains, refining and petrochemical plants and for ground storage tank isolation.The Advanced…

Available in two options: 4” to 12” (100mm to 300mm) and 14” to 24” (350mm to 600mm), the AVT RentEZ program opens the door to easy access to our unique technology through a rent-free or low-cost lease of the AVT EZ Valve® Toolkit.The kit includes an innovative end milling (EM) machine that mills a 120° slot…

The AVT EZ Valve® Toolkit enables safe and efficient installation of the award-winning AVT EZ Valve, an insertion valve. The innovative EM (end milling) machine is the only one of its type on the market that mills a 120° slot across the pipe rather than cutting a coupon or removing a section of pipe. This…

A+ Wrap™ and A+ Max™ are easy-to-install, factory saturated, bi-directional fiberglass composite solutions for on-site permanent repair of corroded and dented pipelines. By eliminating field saturation, resin and fabric measuring, and compressing installation time, A+ ensures the highest repair quality while reducing time to backfill. ApplicationsA+ Wrap is ideal for:Small diameter pipesSoil-to-air interfacesCorrosion and dentsBends…

Atlas™ is the most tested carbon fiber composite solution for the permanent repair and rehabilitation of pipelines and piping structures. Atlas is highly engineered to permanently restore the original strength of pipelines suffering from both common and complex pipeline anomalies while maintaining strict compliance with corresponding regulations, codes and standards.Atlas™ HT is the most tested,…

Casing Spacer is a unidirectional fiberglass sleeve sized for a specific pipe diameter to isolate pipe in casings. Casing Spacers are an extremely robust solution that eliminates traditional integrity issues that can occur when pipes are pulled through casings, protecting the pipe and coating from damage, preventing casing to pipe contact, and reducing construction time…

The Clock Spring composite repair sleeve and reinforcement system is uniquely designed for high-pressure transmission pipelines. Made up of a pretensioned unidirectional e-glass composite coil, a high-modulus filler material, and a high lap-shear strength methyl methacrylate adhesive, it is proven to 8,000 psi and has a design life beyond 50 years and installation history of…

Contour Apex™ is a custom-engineered and optimized composite system for high-pressure pipeline repairs. It employs a robust, bi-directional fiberglass with a specially formulated epoxy system to reinforce external corrosion and mechanical damage such as dents, wrinkle bends, and gouges on transmission and distribution lines. Light-weight, corrosion-resistant Contour Apex helps keep critical pipelines in service during…

Contour WA™ composite solution is one of the strongest and most durable coating materials available. Engineered, bi-axial stitched e-glass tape impregnated with a water-activated polyurethane resin forms a hard shell to protect piping and structures subjected to coating damage. Contour WA™ is designed for repairing corrosion and mechanical damage on lines to 1,500 psi and…

The Pipe Sock™ system, a patented technology , is superior in performance to similar products through its ability to resolve problems associated with crevice corrosion resulting from coating failure due to direct metal-to-metal contact. It consists of pre-formed size specific fiberglass wear pad and a protective modified syl polymer adhesive coating system (Black Magic™) resulting…

Pipe Support mechanical protection system is ideal for terminals, plants, refineries, new pipeline construction, and any pipe support location. It provides effective protection at support or hanger locations and can be applied quickly and easily requiring no special tools or training. As a derivative to the original Clock Spring product, the robust layers of the…

Pipe Wrap® system is a durable, easy-to-use solution that’s ideal for protecting pipes against corrosion, abrasion and impact in piping applications for petroleum refineries, chemical handling and mining. The material is impregnated with fiberglass tape that adheres to PVC, metal pipes and will work underwater. The Pipe Wrap® system is designed to repair leaks up…

SnapWrap™ is a multi-layered system of high-strength, corrosion-resistant fiberglass that forms a composite split sleeve. Designed for repair and reinforcement in tight quarters, on pipe that is difficult to access, and on subsea pipe, it is installed with a high-performance adhesive and filler material and works best on pipe operating to <1,000 psi. The split…

SynthoGlass® is a patented fiberglass pre-impregnated composite that is activated by saltwater or freshwater. When used with the appropriate primary sealant, it can repair and reinforce virtually any pipe in minutes. SynthoGlass® not only restores a pipe to its original pressure rating, it can make the repair area stronger than the original pipe. SynthoGlass® is…

SynthoGlass® XT is a unique, pre-saturated, bi-directional fiberglass composite for repairing and reinforcing internal and external corrosion on piping systems, pipelines, and structures. The pre-saturated system ensures appropriate fiber-to-resin content ratios to deliver reliable performance in restoring pipeline integrity on lines with complex geometry.   Applications Process piping components carrying low-risk process streams including oil,…

Syntho-Support™ is a superior sacrificial outer laminate system to designed to protect corrosion coatings on pipe support areas to prevent crevice corrosion, galvanic corrosion, heat affected zone corrosion, and vibration abrasion. This system provides exceptional mechanical and impact protection for cast steel, stainless steel, galvanized steel, concrete, FRP, ductile iron, and PVC. Syntho- Support UV…

The TridentWrap® riser reinforcement kit has been pre-engineered to repair non-leaking natural gas risers exhibiting wall loss up to 80% at <300 psi (20.7 bar) while eliminating atmospheric corrosion. With 8 layers, this system enables corroded piping to be repaired without shutdown while bringing the section of pipe back to full operating capacity.ApplicationsCorrosion repair on…

TridentSeal® is a live natural gas repair system that permanently seals active leaks, up to 60 psi (4 bar) without interrupting service. It is pre packaged in a kit with enough material to repair a pinhole or threaded fitting on pipe diameters up to 6 inches. Larger repairs can be installed by using more than…

ViperSkin™ is the first bi-axial, hybrid carbon and glass fiber, pre-saturated system to blend the unsurpassed strength and stillness of carbon with the ease and use of a moisture-cured, factory-saturated polyurethane. The pre-saturated system ensures appropriate fiber-to-resin content ratios to deliver reliable performance in restoring pipeline integrity on lines with complex geometry. Contact UsFeatures Moisture-cured…

Delivering Structural Strengthening SolutionsThe Tyfo® advanced composite systems are fiber reinforced polymer (FRP) products specifically made to strengthen structural components.The primary systems are composed of high-strength carbon fibers combined with Tyfo polymers. A variety of unidirectional and bidirectional products are available to optimize the performance provided to each structural element.Choosing the Right Fyfe® Product for YouThe…

Polymers and High-Strength Fibers Define FRP SystemsPolymers combined with reinforced fabrics form advanced composite systems used for structural strengthening. Tyfo® polymer systems are specially formulated to be used in conjunction with the various Tyfo fabrics and prefabricated systems.Our polymers have been optimized to provide convenient working times, excellent indoor air quality, and long-term environmental durability.…

Coatings & Finishes Designed to Withstand the ElementsWhen engineering a repair, rehabilitation, or maintenance project, engineers and designers must consider a range of issues alongside the required final texture and color, such as exposure to elevated temperatures, potable water, and, in some cases, aggressive chemicals that could come into contact with the system.Our range of…