Geopolymer Mortars
Structural Strengthening
LOCTITE GeoSpray geopolymer
The LOCTITE GeoSpray geopolymer system is made of a high-performance, fiber-reinforced geopolymer mortar, specifically formulated and engineered as an environmentally friendly solution for rehabilitating pipes, culverts, and containment areas.Unlike other cementitious mortars and grouts, LOCTITE GeoSpray spray-applied liners help create a new structural pipe within the old pipe. This process requires no digging – virtually…
LOCTITE GeoSpray 61
The GeoSpray® 61 spray-applied liner system is a high-performance, fiber-reinforced mortar specifically designed for corrosion prevention and structural enhancement of pipes in drinking water applications. This high-strength, ultra-low porosity material is made from natural mineral polymers and recycled industrial waste streams. The GeoSpray® 61 system is designed for multiple application techniques, including pouring, placing, troweling, spraying,…
LOCTITE GeoRoc
GeoRoc® geopolymer spray-applied liner is a high-performance, fiber-reinforced mortar specifically designed for the surface reinforcement and weathering protection of soils, rock and coal strata. It can be applied by pouring, placing, troweling or spraying to almost any surface or shape, making it ideal for rehabilitating tunnels, bridges, roads, and other structures.GeoRoc liner creates an integral…
LOCTITE GeoSpray HCE
LOCTITE GeoSpray HCE geopolymer system is the next generation of high-performance, fiber-reinforced geopolymer mortars, specifically formulated for used in highly corrosive environments (HCE). It is engineered to be an environmentally friendly solution for rehabilitating pipes, culverts, and containment areas. This spray-applied liner creates a new structural pipe within the old pipe.The HCE system replaces and offers…
LOCTITE GeoStrong Concrete Repair Mortar
GeoStrong® Repair Mortar is a one-component, non-shrink, fast-setting geopolymer mortar designed for repairing horizontal, vertical and overhead concrete surfaces where high strength is desired. GeoStrong mortar is a corrosion-resistant geopolymer mortar that allows for fast application, up to three inches in one layer, with fast finishing and reduced timebetween lifts. Applications Bridges Buildings Parking structures…
LOCTITE GeoPlug Water-Stop
The GeoPlug® water-stop is a rapid setting water infiltration patch. GeoPlug is uniquely designed to quickly fill, plug and restore blemishes in host pipes during or prior to rehabilitation. It immediately stops leaks in corrugated metal pipe, precast concrete pipe, tanks, floors, wells, manholes, pump station and similar structures. GeoPlug mortar is a temporary repair…
LOCTITE RenewWrap CFRP
LOCTITE RenewWrap FRP Structural Strengthening SystemThe LOCTITE RenewWrap CFRP system is engineered to structurally strengthen columns, walls, piers, slabs and most other structural members of bridges, buildings, parking decks, and other facilities and structures. It is designed to restore strength to deteriorated and compromised structures, as well as improve overall structural performance. This product is…
LOCTITE RenewWrap NSM CFRP Bars
Carbon Fiber BarsGeoTree RenewWrap NSM CFRP Bars are pre-cured carbon fiber bars designed to be used in near surface mount (NSM) strengthening applications. RenewWrap CF bars are manufactured with a grit surface to promote adhesion with the bonding resin.RenewWrap NSM CFRP Bars may be used to strengthen or retrofit a wide range of concrete and…
LOCTITE RenewWrap MCU
The RenewWrap MCU product line is the first structural repair system family of FRP products to be factory-saturated. Rigorous testing has proven that these pre-saturated repairs perform equivalent to or better than field-saturated systems. They can be used in a broad range of environments and possess excellent chemical resistance, making them ideal for use in…
LOCTITE RenewWrap Strand Sheet
Unidirectional Reinforcement SheetsRenewWrap® Strand Sheets are unidirectional reinforcement sheets consisting of an assembly of pre-cured carbon fiber micro bars. They are available in various stiffnesses and may be used to strengthen existing concrete or steel structures by external bonding. These reinforcement sheets combine the best features of traditional wet lay-up fabric and pre-cured plate FRP…