The Water and Civil Infrastructure group, that sits within Henkel’s Infrastructure Protection and Repair (IPR) division was established to address the rapidly growing global challenge of aging infrastructure and to help solve some of the most complex issues facing the water industry today.
As water networks around the world continue to deteriorate, utilities and industrial operators are increasingly looking for reliable, long‑term solutions that minimize downtime, reduce operational risk, and extend the service life of critical assets. With decades of hands‑on experience and a deep understanding of water industry environments, Henkel’s Water and Civil Infrastructure group delivers proven, high‑performance technologies designed to restore, strengthen, and protect essential infrastructure.
Continue reading...
All of us remember the report card from our school days. Some of us eager to receive it and bring it home to show our folks our grade point average (GPA), happily expectant of the accolades they would bestow upon us for a job well done.
Continue reading...
The City of Orinda, California sits within the Diablo Mountain Range just 9 miles east of Oakland, California. Local roads wind through the rolling hills next to many main streams that run through the mountain range. These tributaries empty into the Pablo Reservoir and the Upper San Leandro Reservoir.
Continue reading...
CSNRI‘s Pipeline Integrity Director, Tim Mally has shared his expertise with listeners of the Pipeline Technology Podcast which was sponsored by Pipeline & Gas Journal.
Continue reading...
When the San Diego County Water Authority (SDCWA) inspected its First Aqueduct water conveyance system in Valley Center of San Diego, engineers identified that rehabilitation was required.
Continue reading...
After nearly two decades of proven success, TridentSeal® is now even better! Designed for the repair of live leaks in natural gas distribution, the installation parameters have been extended to address the latest industry technologies and installation needs.
Continue reading...
First Aqueduct Water Pipeline Rehabilitated with Geopolymer for SDCWA. Michels and GeoTree working together.
Continue reading...
Jersey City in New Jersey is undergoing a period of development and growth which has seen its population increase by more than 50,000 people in the last 13 years. To cater for this growth, the Jersey City Municipal Utilities Authority is tasked with maintaining its aging water infrastructure and improving its critical water supply to ensure it can meet the needs of its customers both now and into the future.
Continue reading...
When it comes to pipe rehabilitation several options are available to asset owners, including cured-in-place pipe (CIPP), sliplining, spray applied pipe liners (SAPL), FRPs and spiral wound.
Continue reading...
The Brandywine River bridge makes up a portion of the Delaware Turnpike, carrying I-95 traffic over the Brandywine River in Wilmington, Delaware. The bridge was constructed throughout the mid-1960s and is currently under construction as part of a $200 million project dubbed “Restore the Corridor.”
Continue reading...
In December 2021, Spiniello Companies was awarded Project 2020-424-101-0 from the Pittsburgh Water and Sewer Authority (PWSA). The project — which took place at the Pittsburgh Zoo & Aquarium — consisted of rehabilitating several sewer pipelines in question by using geopolymer lining.
Continue reading...
San Antonio Water & Sewer (SAWS) identified a rusting and leaking header at its main pump station. The corroded equipment could have caused major issues with the output of the pump station so needed to be repaired, but first, it needed to be isolated.
Continue reading...
When E.ON Energy, a UK power company, identified internal corrosion to water cooling lines that serviced its Connah’s Quay gas-fired Power Station in Flintshire, North Wales it called on Fyfe FRP’s UK-approved applicator, Composites Construction UK (CCUK), to carry out emergency repairs.
Continue reading...
Insertion Valve technology is being introduced to Italy via a new strategic partnership between Advanced Valve Technologies (AVT) and Nova Siria & Idroambiente. Nova Siria is now the official Italian distributor of AVT EZ Valves with Idroambiente taking on the role of our certified installer across the region.
Continue reading...
The City of Westfield in Massachusetts, a Team EJP Value Added Service customer, was working with a contractor to install a new box culvert. Upon investigation, it was ascertained that an 18” cast iron water main was in the way of the footings that needed to be poured for the culvert to be installed. The contractor needed to lower the water main, but the city could not shut it down without shutting off a large number of customers.
Continue reading...
When a 67-million-year-old fossil exhibit known as the Dueling Dinosaurs was due to be housed at the North Carolina Museum of Natural Sciences, the building engineers knew the floor would need additional support to take the weight of the behemoths.
Continue reading...
To enable the asset owner to monitor any wall loss at critical points, CSNRI has partnered with Inductosense a leading monitoring company. The Inductosense WAND sensors can be installed under certain CSNRI composite wraps allowing for wall thickness monitoring without the need for removal or re-installation of the composite – saving the customer time and money.
Continue reading...
The Delaware Department of Transportation (DelDOT) has completed its first large-scale metal plate arch rehabilitation using GeoTree Solutions’ GeoSpray geopolymer spray on mortar.
Continue reading...
Advanced Valve Technologies (AVT) manufactures the EZ Valve, an insertion valve that can be installed without the need to shut off the flow and has built an enviable reputation for award-winning product quality, first-class customer service and now, industry-leading product lead times.
Continue reading...
CSNRI has expanded manufacturing capacity for the ThermoWrap® family of composite repair solutions to its Houston manufacturing facility. The move is part of CSNRI’s commitment to a customer-centric business model to provide same day shipping at lowest delivered cost than previously.
Continue reading...
Read the full article and learn more about how pipeline companies can adopt a safe, robust, proven, flexible technology like CSNRI’s Atlas carbon fiber composite repair system that can help keep their pipeline in operation while addressing critical defects.
Continue reading...
Read the full article and learn more about how composite repairs can address CUI safely, quickly, and cost-effectively.
Continue reading...
Register here to access our range of TEC talks which highlight how our products and services can create business value for our customers where shutting down operations is not an option, as well as providing a little light relief to our partners.
Continue reading...
ClockSpring|NRI is shaping the future of critical infrastructure through innovative composites, valves, and concrete products as well as field services, designed to minimize downtime and environmental hazards while maximizing safety and cost-effectiveness.
Continue reading...
Our world-class products perform best when they are installed properly. ClockSpring|NRI experts provide online and classroom instruction along with hands-on training to prepare technicians for certification, and our team is available to oversee installation to ensure maximized durability, reliability, and cost-efficiency.
Continue reading...